Department of Design and Production of Radio Electronic Equipment

National Technical University of Ukraine
"Igor Sikorsky Kyiv Polytechnic Institute"

Robot control unit

Author: Shaporov Oleksandr

Group: РК-51

Supervisor: Adamenko Volodymyr

ELK: First level of higher education (bachelor level)

Speciality: 6.050902 Radioelectronic Devices

Specialization: Intelligent Technologies of Microsystem Radioelectronic Equipment

Summary: The purpose of this project is to create a device that will allow you to manage different robotic platforms and can be used for educational purposes, both for studying programming and for developing electronic skills.
As a result, a set of design documentation was developed for the production of a robot control unit, which can be connected to motors and other actuators directly, managing and control are carried out with the help of wireless communication methods.

Keywords: microcontroller, arduino nano, control systems

The work consists of  54 pages of explanatory note, 3 appendix and 3 drawings

Explanatory note: Full text

Robot arm with voice control

Author: Chabai Dmytro

Group: РК-51

Supervisor: Navrotskyi Denys

ELK: First level of higher education (bachelor level)

Speciality: 6.050902 Radioelectronic Devices

Specialization: Intelligent Technologies of Microsystem Radioelectronic Equipment

Summary: The aim of the graduation project is to develop software for the voiceactivated
manipulator.
The analysis of ready solutions was conducted, a block diagram was developed
and electronic modules were selected. A software was elaborated on such
programming languages as С/С++, С#, XAML. A software performance check has
been performed.

Keywords: arduino uno, voice-activated manipulator, micro controller unit,
software.

The work consists of  81 pages of explanatory note, 1 appendix and 1 drawings

Explanatory note: Full text

Ultrasonic range meter

Author: Tsvietkov Vladyslav

Group: РК-51

Supervisor: Zinher Yana

ELK: First level of higher education (bachelor level)

Speciality: 6.050902 Radioelectronic Devices

Specialization: Intelligent Technologies of Microsystem Radioelectronic Equipment

Summary: The purpose of the diploma project is to develop of an ultrasonic
rangefinder, check it for workability and create the necessary documentation.
In order to achieve this goal, an analysis of existing solutions and functional
devices was performed, an element base was selected, a circuit board was
designed. A three-dimensional model of the device was created and its
construction was described. A set of design documentation is developed.

Keywords: microcontroller, range finder, sensor, ultrasound

The work consists of  60 pages of explanatory note, 3 appendix and 3 drawings

Explanatory note: Full text

Synchronous detector with a reference signal phase adjustment

Author: Fesiuk Anton

Group: РК-51

Supervisor: Perehudov Serhii

ELK: First level of higher education (bachelor level)

Speciality: 6.050902 Radioelectronic Devices

Specialization: Intelligent Technologies of Microsystem Radioelectronic Equipment

Summary: Phase rotator is designed to control the phase of the reference signal.
In the course of work have been developed the structural scheme, the circuit diagram of the electric principle, the elemental base, the printed circuit board and conducted analysis of the SD on the efficiency.
The device being developed provides the possibility to be installed in a separate corps.
The developed phase rotator was tested on the current radiometric system, and the feasibility of its use was proved.

Keywords: synchronous detector, phase rotator, printed circuit board, radiometric system

The work consists of  62 pages of explanatory note, 2 appendix and 0 drawings

Explanatory note: Full text

Multifunctional kitchen device

Author: Kenesov Tilek

Group: РІ-г61-1

Supervisor: Holovnia Viktoriia

ELK: First level of higher education (bachelor level)

Speciality: 6.050902 Radioelectronic Devices

Specialization: Intelligent Technologies of Microsystem Radioelectronic Equipment

Summary: The thesis described the process of upgrading the control unit of multifunc-tional kitchen appliance – multi-cooker. Author analyzed the characteristics of ana-logues of this appliance in several directions: the characteristics of concept of the control unit and the characteristics outer casing. This project identified the main ways of modernization of this appliance by replacing the operating elements of the control unit system. Author provided all necessary calculations to design circuit board, to determine the overall dimensions of device.

Keywords: multi-cooker, modernization

The work consists of  76 pages of explanatory note, 1 appendix and 0 drawings

Explanatory note: Full text

Application of ultrasound for fodder molasses illumination

Author: Savchenko Ihor

Group: РК-51

Supervisor: Holovnia Viktoriia

ELK: First level of higher education (bachelor level)

Speciality: 6.050902 Radioelectronic Devices

Specialization: Intelligent Technologies of Microsystem Radioelectronic Equipment

Summary: The purpose of the thesis is to determine the influence of ultrasound on the illumination of fodder molasses.
In this work the study of the influence of ultrasound on the color of the molasses, its qualitative and quantitative changes is carried out. For this purpose, a technique was developed for its sounding with the use of bentonite.
Based on the results obtained, conclusions were made on the dosage of bentonite and the optimal sounding time of molasses for its visible light.
Implementation of the treatment of molasses and increase the process productivity may be possible provided that the flow-through treatment scheme is implemented in a thin layer. Increasing volumes of simultaneously treated liquid is possible due to the use of coordinated work of several ultrasonic vibrational systems.

Keywords: ultrasound, lighting, molasses, molybdenum, cavitation

The work consists of  60 pages of explanatory note, 1 appendix and 0 drawings

Explanatory note: Full text

Drum set electronic module

Author: Ponomarov Ihor

Group: РК-51

Supervisor: Adamenko Volodymyr

ELK: First level of higher education (bachelor level)

Speciality: 6.050902 Radioelectronic Devices

Specialization: Intelligent Technologies of Microsystem Radioelectronic Equipment

Summary: In the graduation thesis an electronic module for the drum set. The main fea-ture of this device is the ability to transfer information over a wireless channel.
The thesis includes the analysis of known designs, taking into account all the advantages and disadvantages of the existing solutions, an electronic module for the drum set was designed. Thesis focuses on development of drumset electronic module that complies with aforementioned considerations, namely: development of the structural scheme, development of the schematics, selection of components, development of printed circuit boards, and analysis of the overall design, calcula-tions were made to confirm its efficiency.

Keywords: electronic drums, musical instruments, esp8266, atmega16u2, stm32f103c8t6, data transmission

The work consists of  55 pages of explanatory note, 4 appendix and 3 drawings

Explanatory note: Full text

Laboratory sinusoidal signal generator

Author: Ponomarenko Vladyslav

Group: РК-51

Supervisor: Holovnia Viktoriia

ELK: First level of higher education (bachelor level)

Speciality: 6.050902 Radioelectronic Devices

Specialization: Intelligent Technologies of Microsystem Radioelectronic Equipment

Summary: The diploma project was conducted to study the development of the laboratory generator of sinusoidal signals and shaky frequency signals was developed for use in amateur radio measuring systems for the adjustment and adjustment of individual radio electronic devices.
Developed a schematic circuit diagram of the device on the basis of chip DDS. The calculations confirming the performance of the device are given. As a result of the work, a set of design documentation was made.

Keywords: laboratory generator, dd, construction

The work consists of  81 pages of explanatory note, 4 appendix and 2 drawings

Explanatory note: Full text

Onboard microcontroller computer for a car with an internal combustion engine

Author: Poznakhor Dmytro

Group: РІ-г61-2

Supervisor: Nikitchuk Arterm

ELK: First level of higher education (bachelor level)

Speciality: 6.050902 Radioelectronic Devices

Specialization: Intelligent Technologies of Microsystem Radioelectronic Equipment

Summary: The board computer was developed in this diploma project, which provides for the possibility of installing it on any car with an internal combustion engine.
The analysis of known structures was carried out, taking into account all the advantages and disadvantages of the considered solutions, the board computer was designed, namely: the development of principal cell electricalscheme, the selection of an element base, the development of a printed circuit board and design.
The device is recommended for installation on any car, after having agreed upon the parameters of the equipment, which is supposed to be installed with the initial data indicated in the technical task.

Keywords: board computer, microcontroller, printed circuit board, arduino nano, radio module.

The work consists of  50 pages of explanatory note, 3 appendix and 3 drawings

Explanatory note: Full text

Stationary room security alarm

Author: Penkov Vladyslav

Group: РК-51

Supervisor: Nikitchuk Arterm

ELK: First level of higher education (bachelor level)

Speciality: 6.050902 Radioelectronic Devices

Specialization: Intelligent Technologies of Microsystem Radioelectronic Equipment

Summary: The graduation project presents the stationary security alarm system for the premises with GSM module control.
The aim of the project is to develop a security alarm system on the Arduino controller and writing software code who can set it up themselves. The project presents a block diagram, electronic module and an overview of existing solutions and devices for addressing the deficiencies. We considered available programming languages and substantiated the choice of such languages as C/C++, for writing a smartphone or computer software. A software performance check has been performed.

Keywords: arduino nano, alarm system, gsm, microcontroller, programming languages, software.

The work consists of  65 pages of explanatory note, 1 appendix and 1 drawings

Explanatory note: Full text

Clock with weather station functions

Author: Pavlenko Kostiantyn

Group: РК-51

Supervisor: Holovnia Viktoriia

ELK: First level of higher education (bachelor level)

Speciality: 6.050902 Radioelectronic Devices

Specialization: Intelligent Technologies of Microsystem Radioelectronic Equipment

Summary: The purpose of this diploma project is to develop a home-based meteorological
weather microcontroller.
The project developed the scheme using microcontroller ATMEGA32A, based
schemes conducted choose components. A printing unit and conducted design
choices. Carried out the necessary calculations to confirm the efficiency of the device
and compliance standards and regulatory documents.
This device can be used in homes to control temperature and humidity, and to
monitor atmospheric pressure.

Keywords: meteorological station ,microcontroller

The work consists of  69 pages of explanatory note, 1 appendix and 1 drawings

Explanatory note: Full text

Bipolar power supply for low-frequency

Author: Mykheikin Viktor

Group: РК-51

Supervisor: Shulha Alina

ELK: First level of higher education (bachelor level)

Speciality: 6.050902 Radioelectronic Devices

Specialization: Intelligent Technologies of Microsystem Radioelectronic Equipment

Summary: In this diploma project was developed a bipolar power supply for low
frequency amplifiers. A circuit diagram of electrical principles and the case for the
device has been designed.
The calculations on the design of a printed circuit board, calculation of
vibration resistance, reliability and thermal calculation are given.
Recommendations on occupational safety have been developed.

Keywords: power supply, board, printed circuit board, elements

The work consists of  55 pages of explanatory note, 0 appendix and 0 drawings

Explanatory note: Full text

Switching automat for the car front and rear video cameras

Author: Melnyk Oleksandr

Group: РК-51

Supervisor: Nikitchuk Artem

ELK: First level of higher education (bachelor level)

Speciality: 6.050902 Radioelectronic Devices

Specialization: Intelligent Technologies of Microsystem Radioelectronic Equipment

Summary: The purpose of the degree project is development of the module of automatic switching of video cameras of a front and rear view of the car for convenient and safe parkings.
In the project it is investigated analogs, it is picked up optimum element base and it is chosen the most effective technical solutions. On the basis of the studied data it is designed the printed circuit board of the automatic machine of switching of video cameras, it is chosen necessary components. The calculations confirming op-erability of the device and compliance to all normative documents and standards are carried out.

Keywords: switchboard ,microcontroller, printed circuit board, video camera

The work consists of  43 pages of explanatory note, 1 appendix and 3 drawings

Explanatory note: Full text

Portable charger

Author: Makarenko Vladyslav

Group: РК-51

Supervisor: Zinher Yana

ELK: First level of higher education (bachelor level)

Speciality: 6.050902 Radioelectronic Devices

Specialization: Intelligent Technologies of Microsystem Radioelectronic Equipment

Summary: The purpose of this project is to develop the device "Portable Charger", which can restore the batteries. To solve this goal, the existing solutions on the market and circuitry were examined. The component base was chosen, the electric circuit design was developed in principle. Printed circuit elements are calculated and a printed circuit board is designed. The exterior of the body has been designed and its appearance, material and placement of controls and displays are selected.

Keywords: accumulator, charger, portable

The work consists of  46 pages of explanatory note, 3 appendix and 3 drawings

Explanatory note: Full text

Signal generator with personal computer control

Author: Liashko Andrii

Group: РК-51

Supervisor: Adamenko Volodymyr

ELK: First level of higher education (bachelor level)

Speciality: 6.050902 Radioelectronic Devices

Specialization: Intelligent Technologies of Microsystem Radioelectronic Equipment

Summary: In the graduation thesis an electronic module for the signal generator. The main feature of this device is the ability to control it with a PC.
The thesis includes the analysis of known designs, taking into account all the advantages and disadvantages of the existing solutions, an electronic module for the drum set was designed. Thesis focuses on development of signal generator module that complies with aforementioned considerations, namely: development of the structural scheme, development of the schematics, selection of components, development of printed circuit boards, and analysis of the overall design, calculations were made to confirm its efficiency.

Keywords: signal generator, dds, ad9851, arduino nano

The work consists of  46 pages of explanatory note, 4 appendix and 3 drawings

Explanatory note: Full text

High frequency ultrasonic sprayer

Author: Lysak Bohdan

Group: РК-51

Supervisor: Novosad Andrii

ELK: First level of higher education (bachelor level)

Speciality: 6.050902 Radioelectronic Devices

Specialization: Intelligent Technologies of Microsystem Radioelectronic Equipment

Summary: In the diploma project the ultrasonic generator and the design of the sprayer are developed. The feature of this device is a large coefficient of efficiency and low cost ultrasound generator.
The analysis of circuit design and market is carried out. he direction of development of circuit design is chosen. The structural and electrical principle scheme was developed, the element base was selected, the design plates and the design of the sprayer were developed, calculations were made that confirm its efficiency.

Keywords: piezoelectric, ultrasonic nebulizer, generator

The work consists of  50 pages of explanatory note, 2 appendix and 3 drawings

Explanatory note: Full text

Television amplifier control device in digital analog transmitters

Author: Kukurudza Serhii

Group: РК-51

Supervisor: Nikitchuk Artem

ELK: First level of higher education (bachelor level)

Speciality: 6.050902 Radioelectronic Devices

Specialization: Intelligent Technologies of Microsystem Radioelectronic Equipment

Summary: В даному проекті розроблений пристрій управління та контрою телевізійними підсилювачами в складі цифро-аналогових передавачів. Цей пристрій призначений для керування підсиленням сигналів зображення і звукового супроводження в складі цифро-аналогових телевізійних передавачів.
Контроль та керування параметрами підсилювачів в ТВ передавачах, є набагато складнішою задачею ніж в передавачах іншого типу. Окрім цього, в процесі експлуатації підсилювача, параметри повинні зберігатись в допустимих межах без регулювання в продовж певного часу.
Інтенсивне залучення мікропроцесорної та обчислювальної техніки, ведеться задля створення цілком автоматизованих систем контролю та управління параметрів ТВ підсилювачів.
Сучасні підсилювачі потужності повинні забезпечити постійність своїх параметрів на протязі довгого строку експлуатації. Тому в розробці приладу слід використати програмне керування, яке дозволить зробити плавне зростання потужності при вмиканні.

Keywords: device, amplifier, printed circuid board

The work consists of  70 pages of explanatory note, 4 appendix and 0 drawings

Explanatory note: Full text

Earthquake detector based on arduino

Author: Kubai Vadym

Group: РК-51

Supervisor: Zinher Yana

ELK: First level of higher education (bachelor level)

Speciality: 6.050902 Radioelectronic Devices

Specialization: Intelligent Technologies of Microsystem Radioelectronic Equipment

Summary: There are many areas where emergency protection and earthquake prevention are required. The purpose of this project is to develop an Arduino-based earthquake detector. The task is to record vibrations and alert the possible earthquake hazard. An analysis of existing technical solutions was carried out, and the pros and cons of theirs were found. There are calculations of parameters done for circuit design and reliability of the gadget. A set of design documentation is developed.

Keywords: earthquake, vibration, detection, prevention, prevention

The work consists of  53 pages of explanatory note, 4 appendix and 3 drawings

Explanatory note: Full text

Indoor air quality monitor

Author: Ivanov Dmytro

Group: РК-51

Supervisor: Zinher Yana

ELK: First level of higher education (bachelor level)

Speciality: 6.050902 Radioelectronic Devices

Specialization: Intelligent Technologies of Microsystem Radioelectronic Equipment

Summary: The analysis of already known designs and circuit design decisions is carried
out. Taking into account their advantages and disadvantages, namely in the
functional and electrical parameters, the indoor air quality monitor was designed.
The structural and principal schemes have been developed, the element base and the
printed circuit board material have been selected, the device design has been made,
as well as the calculations that prove its efficiency.
The graduation project has developed a device for monitoring indoor air
quality. The feature of this device is the high accuracy of the measuring values and
a relatively small price.

Keywords: air quality monitor, sensors

The work consists of  52 pages of explanatory note, 3 appendix and 4 drawings

Explanatory note: Full text

Multichannel power supply for radiometric receivers

Author: Zheliak Maksym

Group: РІ-31в

Supervisor: Nepochatykh Yurii

ELK: First level of higher education (bachelor level)

Speciality: 6.050902 Radioelectronic Devices

Specialization: Intelligent Technologies of Microsystem Radioelectronic Equipment

Summary: The purpose of the diploma project is the development of an oscilloscope with the output of information on the PC screen.
After evaluating the existing analogues, it was decided to develop a cheaper device. For this purpose, the structural scheme and the circuit of electric principles are chosen.
For the selected scheme, the component base has been selected.
On the basis of the received data, a printed circuit board was developed in the medium-high Altium Designer.
Corps according to the size of the board.
As a result, cheaper than the foreign analogues of the e-mail is received.

Keywords: usb, microcontroller, adc, oscilloscope

The work consists of  73 pages of explanatory note, 0 appendix and 0 drawings

Explanatory note: Full text